The cutting blade belongs to the grinding wheel. It is made of abrasive and binder resin, and is used to cut ordinary steel, stainless steel, metal and non-metal. It is divided into resin cutting blades and diamond cutting blades. How to install and set the safety signs of cutting blades effectively and safely? Today, I will take you to summarize the main points of the setup.
(1) Safety signs should be set up in conspicuous positions related to safety, and there should be enough time to pay attention to the content of signs related to cutting parts.
(2) The safety signs set up at specific locations should be firmly installed to ensure that they will not cause danger, and all signs should have a solid structure.
(3) When the safety sign is placed on a wall or other existing structure, the background color should form a contrasting color with the main color on the sign.
(4) For those safety marks for cutting parts that are no longer useful, they should be removed from the setting immediately, otherwise it will cause observers to ignore and interfere with other useful marks.
(5) When multiple signboards are combined, they should be arranged in the order of warning, prohibition, instruction, and prompt, first from left to right, and from top to bottom.
(6) All signs must be installed in a location that is harmless to people.
(7) Danger and warning signs should be set far enough away from the source of danger to ensure that observers have enough time to see the signs and notice the danger for the first time. This distance varies with different situations.
(8) Safety signs should not be placed on moving objects, such as doors and windows, because any changes in the position of the objects will obscure the observation of the signs.
(9) The installed sign shall not be moved at will, unless the position change is conducive to the warning function of the sign
(10) In order to effectively play the role of signs, they should be inspected and cleaned regularly. If you find deformation, damage, discoloration, falling off of graphic symbols, aging of brightness, etc., you should replace or repair it immediately to keep it in good condition. The safety management department shall do a good job of supervision and inspection, and promptly correct any problems found.
(11) Regularly publicize the regulations on the use of safety signs for cutting parts to employees, especially those who need to follow preventive measures. When a new sign is proposed or the position of an existing sign is changed, employees should be notified in advance and the reasons for the setting or change should be explained so that employees can understand it clearly.
Only when the above issues are comprehensively considered, the safety signs set for the cutting parts can effectively play the role of safety warning.
