Cutting discs-the main factor affecting this wear: In most cases, the higher the hardness of the material, the better the wear resistance; the amount of wear increases with the average size of abrasive particles. The amount of wear increases as the hardness of abrasive particles increases.
The main function of the cutting disc is to cut things, such as ultra-thin cutting discs for cutting precision diamonds, gems, precision ceramics, light-emitting diode substrates, electronic component pins, circuit boards and other industries. They are large in size and can be used for cutting horses. Cut slices for routes, marble, granite, rock, etc.
It depends on what industry you use to cut the workpiece. Currently, ultra-thin cutting discs are used in all industries. There are currently several cutting discs. Ultra-thin diamond cutting blades are used for cutting non-metals, while cutting blades for hard materials such as cubic boron nitride are used for cutting metals.
The cutting part is made of high-strength resin, preferably a special abrasive. They allow a large line speed, exceeding 50 meters per second, and they are not easy to break. Sharp cutting, minimal cutting heat, and shallow sample heat-affected layer to minimize interference. Cutting discs are widely used in machinery, automobiles, ships, metallurgy, chemical industries and other industries, and can also be used for iron decoration and equipment maintenance in modern houses and factories. Professional grinding of ordinary metal, stainless steel, refractory steel, tool steel, construction metal, gray cast iron, hard cast iron metal. When the grinding wheel is working, it is not easy to burn and heat, the cutting speed is fast, the efficiency is high, and it is durable.
1. The cutting disc is not stuffed, and it can play a good grinding and cutting efficiency.
2. The moderate flexibility of the cutting blade is suitable for grinding and arc cutting.
3. When the cutting blade is working, the burrs on the working surface are removed to make the working surface smooth
4. The cutting blade has an air cooling effect, which can obviously avoid heating and scorching on the working surface
5. The cutting disc is safe, sharp, wear-resistant, non-heating, non-hot, energy-saving, labor-saving, time-saving, high-efficiency, economical and practical.
6. The cutting parts meet the customer's requirements for non-calibration, and can be made according to the customer's drawings or samples.
