Resin cutting blades are cutting tools that electricians and other workers can use. In order to achieve safe production and improve production efficiency, some details need to be paid special attention to when using resin cutting discs. The following will tell you four small problems that you need to pay attention to when using.
1. When the cutting is not sharp, trim and cut the cut pieces. If you continue to use it, overheating and overloading will occur, and the cutting blade will be damaged. In addition, it should be noted that the cutting blade is strictly prohibited to be used for bevel cutting or operations other than cutting to avoid abnormalities caused by uneven stress.
2. When the cutting blade is rotating, it is strictly forbidden to cut by hand, let alone touch the cutting blade with your hands and body. If any abnormality is found during the cutting process, it should be stopped immediately. It should be noted that when the cutting blade is marked with the direction of rotation, it should be consistent with the direction of rotation of the machine tool. On the contrary, the cutting is not sharp, and it is difficult to exert the performance of the cutting piece.
3. If you use cutting parts that do not match the workpiece to be cut, abnormal wear, poor sharpness, and abnormal heating will occur. It happens easily. In addition, it should be noted that when the flange is too small or the accuracy is poor, the cutting blade is easily damaged. Please use after improvement.
4. Please check carefully before installing the cutting disc to confirm whether the cutting disc is deformed, cracked or cracked.
