Cutting Disc

All abrasives wheels are fragile. They should be handled with care.

4.5 metal cut off wheels to this angle grinder. Use for any other purpose is not recommended and creates a hazard, which will result in serious injury.All abrasives wheels are fragile. They should be

4.5 metal cut off wheels to this angle grinder. Use for any other purpose is not recommended and creates a hazard, which will result in serious injury.

The aluminum oxide cutting disc is made of abrasives and binders. Since the friction between the cutting disc and the workpiece to be ground will generate a lot of heat, the binder is easily softened

double net cut off wheel provides premium performance and increases productivity. Thin Kerf design provides for a thin cut, allowing your power tool to work at its full potential. Unlike other bonded

4.5 metal cut off wheels to this angle grinder. Use for any other purpose is not recommended and creates a hazard, which will result in serious injury.

4 1/2 Inch cut off wheels are made of abrasive grain bonded with an organic bond system and used for cutting, notching and grinding. They are used with both portable and stationary tools on numerous

suppliers cutting disc Thin Kerfs design provides for a thin cut; draws less power/less resistance; and allows your power tool to work at its full potential

sharp and durable cutting disc is the most important type of abrasive tool in grinding process. The cutting wheel is a porous body made by adding a bonding agent to the abrasive, and then forming a

125 mm cutting disc cut small material workpieces at 90-degree angles, whereas grinding wheels grind large material workpieces from a low angle. As a result, cut-off wheels are quite thinner than

Often cutting discs, also known as cut-off wheels, are made from a solid abrasive disc. These discs are often used for cutting metal; they are composed of an abrasive mix of grit and adhesive that is

Cut-off Wheels are made of abrasive grain bonded with an organic bond system and used for cutting, notching and grinding. They are used with both portable and stationary tools on numerous materials