Green Color Cutting Disc

Overview

115x1.0x22.23mm 4.5" metal cut off wheels

4.5" metal cut off wheels to this angle grinder. Use for any other purpose is not recommended and creates a hazard, which will result in serious injury.

How should I handle the wheel after use?

1. The cutting disc is made of abrasives and binders. Since the friction between the cutting disc and the workpiece to be ground will generate a lot of heat, the binder is easily softened. 

2. The cutting disc will become a little dull after a long time of hard work. This is mainly due to the friction between the surface particles and the cutting tool during the work, which will gradually wear and become dull. When the grinding resistance exceeds the bonding force between the particles and the binder , the particles begin to fall off and are replaced by new sharp particles. 

3. The ground metal powder and the binder are bonded and filled in the gap between the sand grains, and the cutting disc is plugged. If you continue to work with this plugged cutting disc, not only the work efficiency is quite low, but the grinding tool will also turn blue and cause annealing.

Hot Tags: green color cutting disc, China, suppliers, manufacturers, factory, wholesale, made in China