Cutting Disc

where the cutting disc is used. The cutting disc can be divided into cutting type and grinding type according to the way of use. Most of the cutting machines are fixed and mobile, and the power of...

Cut-off wheels are among the most common bonded abrasive products in use. Found everywhere from metal fabrication shops to homeowners’ garages, these wheels are very safe when used correctly....

the hardness of the disco corte metal, in the face of more and more new metal products in the future, the hardness requirements of the disco corte metal products will also increase. The hardness...

premium 4-1/2 in. x 0.040 in. x 7/8 in. Metal Cut-Off Type 1 Disc provides premium performance and increases productivity. Diablo's Thin Kerf design provides for a thin cut, allowing your power...

Overview 4 1/2" 115x1.0x22.23mm Resin cutting discs Hardness: refers to the firmness of the bonding agent to the abrasive grains. There are different grades of soft, medium and hard. Resin cutting...

premium 4-1/2 in. x 0.040 in. x 7/8 in. Metal Cut-Off Type 1 Disc provides premium performance and increases productivity. Diablo's Thin Kerf design provides for a thin cut, allowing your power...

Cutting wheels (ask cut-off discs) are an abrasive tool used for fast cutting of materials like metal, concrete, and stone. Their portability allows the operator to move around freely with it and...

The cutting disc is made of abrasives and binders. Since the friction between the cutting disc and the workpiece to be ground will generate a lot of heat, the binder is easily softened.

All abrasives wheels are fragile. They should be handled with care.

4.5" metal cut off wheels to this angle grinder. Use for any other purpose is not recommended and creates a hazard, which will result in serious injury.All abrasives wheels are fragile. They...

4.5" metal cut off wheels to this angle grinder. Use for any other purpose is not recommended and creates a hazard, which will result in serious injury.

The aluminum oxide cutting disc is made of abrasives and binders. Since the friction between the cutting disc and the workpiece to be ground will generate a lot of heat, the binder is easily softened