The hardest cutting disc should be a diamond product, which is mainly composed of a matrix and a cutter head. The base body is the main support component for bonding the cutter head, and the cutter head is the part that plays a cutting role during use. The cutter head will continue to be consumed during use, but the base body will not. The cutting blade manufacturer reminds everyone to pay attention to some safety precautions when using a diamond cutting blade to cut:
1. During operation, if the cutting blade is damaged, it must be stopped immediately, and a good cutting blade must be replaced before operation. After the cutting is completed, first turn off the power. When the grinding wheel stops rotating, pick up the object again to prevent the flying knife from hurting people.
2. When replacing the cutting parts, first turn off the power and hang a warning sign. The cutting pieces must be concentric and close to avoid falling off and hurting people.
3. It is strictly forbidden to polish objects on the cutting parts
If the hardness of the cutting blade is too low, the cutting efficiency will be low and the cutting blade will be wasted. Diamond is currently the hardest substance. It rubs and cuts the processed object in the cutter head. Cutting board manufacturers are striving to produce high-quality cutting products to meet customer needs.
