Products

1. After polishing, the brightness can reach more than 100 2.According to requirements, BUFF with different brightness can be selected

Thin cut off wheel stainless steel (. 045 inch) and ultra-thin (1 millimeter) wheels are best. These wheels remove less material at once to provide a faster and cleaner cut that creates less...

Often steel-cut-disk, also known as cut-off wheels, are made from a solid abrasive disc. These discs are often used for cutting metal; they are composed of an abrasive mix of grit and adhesive...

Cut-off wheels 4 1/2 inch cut small material workpieces at 90-degree angles, whereas grinding wheels grind large material workp ieces from a low angle. As a result, cut-off wheels are quite...

Ultra-thin cut off discs thicknesses range from 0.04 in (1.02 mm) to 0.09 in (2.38 mm). Ultra-thin cutoff discs are 0.04 in (1.02 mm) or 0.045 in (1.14 mm) thick. These thinner discs cut metal...

The Type 27 Cut Off Wheel must be used with an appropriate guard and a depressed center back flange. The center hub protects the user from cutting too deeply. The hub also allows for avoiding...

​Type 41 cut-off wheel, is completely flat. It is typically considered the most efficient type of wheel for general all-purpose cutting. Because it lacks a depressed center, it provides more...

For easy cut cutting disk, choose a 1mm or 0.8mm disc. The beauty of these thinner discs is that they will cut through sheet metal faster, reducing clean-up work. For heavier steel cutting jobs on...

steel cutting disk for clean, precise cuts in stainless steel and other metals. Creates less noise, dust and heat, meaning less damage and discolouration. Supplied in a reclosable metal box for...

Cutting disk are best for cutting through metal and are available in different thicknesses as explained below. For standard, everyday jobs on stainless or mild steel, opt for a 1mm or 1.6mm disc...

Cutting disk are used for cutting all types of metal and other dense or non dense material like plastic or wood for fast and straight cuts. Branded and unbranded discs are available to fit most...

Cup Brush Knot-twisted 3" D X 5/8"-11 Knot-twisted for heavy-duty brushing such as deburring, weld edge cleaning, removal of scale, spatter, heavy rust and corrosion, etc. High Performance...