The use of cutting discs and precautions:
1. Before installing the cutting disc, observe whether there are deformations, cracks, and soft films on the surface of the cutting disc.
2. The direction of rotation is clearly marked on the trademark of the cutting disc, which should be consistent with the direction of rotation of the cutting machine. If there is an inconsistency, it is difficult to exert the performance of the dicing sheet itself.
3. If the workpiece to be cut does not match the cutting disc. It is prone to phenomena such as not being cut, poor sharpness, and heat generation at the incision.
4. During the cutting process, it is strictly forbidden to touch the cutting disc with your hands and body parts.
5. If abnormal phenomena such as the cutting machine stuck or the cutting is not sharp, etc., it is necessary to stop the machine for inspection in time.
Send an inquiry to Delun to get the operation manual of Abrasive Disc, welcome to get it!
