Grinding wheel cutting machine, also called grinding wheel saw, grinding wheel cutting machine is suitable for construction, hardware, petrochemical, mechanical metallurgy and water and electricity installation departments. Grinding wheel cutting machine is a commonly used equipment for cutting metal square flat tubes, square flat steels, I-beams, channel steels, carbon steels, yuan tubes and other materials.
The grinder is mainly composed of a base, a grinding wheel, an electric motor or other power sources, a bracket, a protective cover, and a water feeder. The grinding wheel is set on the top surface of the base, and the base is provided with a power source. Space, the power source drives a reducer. The reducer has a drive shaft that penetrates the top surface of the base for fixing the grinding wheel. The base has a recessed water catchment area corresponding to the bottom of the grinding wheel, and the water catchment area extends outwards. In the first channel, the water feeder is arranged above the side of the grinding wheel, and there is a space for containing water in the water feeder, and the side of the water feeder corresponding to the grinding wheel has a water outlet. The overall transmission mechanism is very streamlined and perfect, which makes the grinding process more convenient and smooth and improves the grinding efficiency of the overall grinder.
The grinding wheel is brittle and has a high speed. The following safety operating regulations should be strictly observed when using:
The operation box or switch is intact and has grounding protection.
When the control handle is used for cutting, the force should be uniform and stable. Do not use too much force to avoid the overload of the grinding wheel cutting disc.
Check that the clamping device of the grinding wheel cutting machine should be flexible and reliable, and the handwheel, screw, nut, etc. should be intact.
The lever of the grinding wheel cutting machine should have sufficient strength and rigidity to keep the grinding wheel lifted freely after all the parts are installed.
The lever shaft should be intact, flexible and reliable in rotation, and locked with a nut after being assembled with the lever.
When replacing the cutting disc of the grinding wheel, the power supply must be cut off. The newly installed grinding wheel cutting disc must meet the equipment requirements.
After replacing the cutting disc of the grinding wheel, check whether there is obvious vibration in the trial operation, and confirm the normal operation before using it.
When using the grinding wheel cutting machine, the rotation direction of the grinding wheel should be avoided as far as possible from nearby workers, so as not to accidentally injure others.
The supporting wheels should be complete and intact, with firm installation and flexible rotation. The placement should be balanced and reliable, and there should be no obvious vibration during work.
The protective cover of the transmission device and the grinding wheel is safe and reliable, and can block the flying debris after the grinding wheel is broken. The baffle at the end should be firmly installed on the cover, and it is strictly forbidden to remove it during work.
After the operation is over, the power supply should be cut off immediately, organized and placed.
