Three techniques to improve the performance of flap disc:
1. The correct choice: The correct choice of flap wheel can ensure that the flap disc aremaximized. The cutting force of a good quality flap wheel is relatively strong, which can adapt to the cutting treatment of different strength materials. Its heat-resistant and wear-resistant characteristics can also complete large-scale equipment grinding and polishing. It has stronger hardness and has a better service life than similar cutting The slice product is as many as several times.
2. Sufficient pressure: Excessive use will cause the flap disc to be overloaded and overheated, which will cause the flap disk to wear faster and reduce the effectiveness of the abrasive. At the same time, if there is not enough pressure to use, the flap wheel will not engage with the metal, which is not enough to effectively grind the surface, which will lead to longer grinding time and further wear.
3. Correct use: The flap disk is designed to work at an angle. The angle depends on your manufacturing and what you are grinding, however, it is generally between 5 and 10 degrees on a flat surface or horizontal. If the angle is too flat, too many blade particles will immediately connect with the metal, causing the flap wheel to wear faster. If the angle is too high, the blade cannot be fully used. This will result in excessive wear of some flap wheels and insufficient grinding.
